Xerox WorkCentre XE90fx-9907 - Manual (Page 20)

U s e r G u i d e
2.12
P R O G R A M M A B L E F E A T U R E S E T T I N G S
For assistance in changing the preset values refer to Programmable Feature Settings.
P r o g r a m
N u m b e r
P r o g r a m
O p t i o n N u m b e r /
O p t i o n
( D e f a u l t i s b o l d )
6 Copy Contrast Adjustment:
The copy contrast range may
be adjusted when the copy
image is consistently too light
or too dark. 0 - Lightest:-4
1 - -3
2 - -2
3 - -1
4 - Nominal
5 - +1
6 - +2
7 - +3
8 - Darkest:+4
7 Paper Trail Edge Void (4
mm): The trail edge void can
be turned off to accommodate
originals that have print to
the very bottom edge. When
Off, another 4 mm will copy;
however, the image quality
may deteriorate as it gets
closer to the bottom edge. 0 - On
1 - Off
10 Zoom R/E Preset 50-200% in 1% increments
(default:
50%)
14 Return to Print Mode time-out 0 -1 minute
1 - 1.5 minutes
2 - 2 minutes
3 - 2.5 minutes
4 - 3 minutes
5 - Off, infinite time out
XE90QRG.BK Page 12 Wednesday, January 5, 2000 9:55 AM