Xerox WorkCentre XE90fx-9907 - Manual (Page 58)

8.6
U s e r G u i d e
R E P L A C I N G T H E D R U M C A R T R I D G E
Open the front cover by pulling it forward.
Place some scrap paper on a nearby level
surface.
Gently pull out the toner cartridge. Do
not pull it all the way out of the
WorkCentre.
Hold the handle to support the toner
cartridge, and then pull it clear of the
WorkCentre.
Place the toner cartridge on the scrap
paper prepared in step 2.
1
2
3
4
Warning: The fusing unit beneath the
drum cartridge becomes very hot when
the WorkCentre is in use. Be careful not
to touch the fusing unit when removing
the drum cartridge.
5
XE90QRG.BK Page 6 Wednesday, January 5, 2000 9:55 AM