Xerox WorkCentre XE90fx-9907 - Manual (Page 17)

2.9
U s e r G u i d e
P R O G R A M M A B L E F E A T U R E S E T T I N G S
2
Press the 1 button until the option number
you want is displayed.
Press Start to store the selection.
Press the Copy Quality button to return to the
copy mode.
Setting 10
Use the following procedure to change the
preset Reduction/Enlargement default
setting. This feature allows you to set a
specific preset reduction or enlargement
between 50-200%.
Select the Toner Saver by using the Copy
Quality button.
Press again and hold the Copy Quality button
for approximately 4 to 6 seconds.
• The light next to Auto will light.
• The lights within the WorkCentre
Diagram will flash.
Press the 10 button until the number 10 is
displayed.
Press Start. The current reduction/
enlargement setting will flash.
Note: To continue making other
changes, press the Clear button and
repeat steps 3 - 6.
5
6
7
1
2
3
4
XE90QRG.BK Page 9 Wednesday, January 5, 2000 9:55 AM