Xerox WorkCentre XE90fx-9907 User Manual
Page 22
2.14
U s e r G u i d e
C O P Y I N G F R O M T H E S I N G L E P A S S F E E D E R
Copying from the Single Pass Feeder
Place originals face down in the Single
Pass Feeder. (Maximum of 30.)
Adjust the side guide within 1/32 in.
Press the
Start button on the Control
Panel.
The copy will exit to the paper output
support tray.
Two-Sided Copying
Place one original face down on the
Document Glass, with the TOP toward the
LEFT. Lower the document cover.
Select the quantity of 1. To maintain copy
quality run one copy at a time.
Press
Start to make side 1 copy.
1
Note: Use the Release Button on the
Single Pass Feeder (located in top rear
of the SPF) to remove jams.
2
3
4
Note: Although not designed for this
purpose, you may use the XE90fx for
two-sided copying.
Note: 16 lb/60 g/m
2
paper is not
recommended for two-sided copying.
1
2
3
XE90QRG.BK Page 14 Wednesday, January 5, 2000 9:55 AM