Setting the printer driver (mac os 9.x or earlier) – Xerox WorkCentre M123-M128-4323 User Manual
Page 41
5 Operation on Macintosh Computers
Xerox WorkCentre/WorkCentre Pro 123/128/133 PostScript® User Guide
41
8.
When the dialog box showing installation has completed appears, click [Restart]
or [Quit].
This completes the installation.
Proceed to Setting the Printer Driver (Mac OS 9.x or earlier) on page 41 to continue.
Setting the Printer Driver (Mac OS 9.x or earlier)
When you finish installing the Adobe PostScript printer driver, set the PostScript Printer
Description (PPD) file for this machine to the printer driver.
The printer driver controls the functions of this machine based on the information in the
PPD file.
NOTE: This guide uses the screens for WorkCentre M128 as examples.
1.
Make sure that the machine is on.
2.
Check that the machine’s EtherTalk port is set to Enable.
You can check the EtherTalk settings in the System Settings List. See User Guide
for details about how to print the System Settings List.
3.
On the Apple menu select [Chooser], then click [Adobe PS].
4.
Select your printer from the Select a PostScript Printer list box, which appears to
the right of the Chooser, then click [Setup].
This automatically searches for the printer and sets the PPD file.
If the search for the PPD file is not automatically performed:
(1) Click [Select PPD].