Xerox WorkCentre M123-M128-4323 - Manual (Page 40)

5 Operation on Macintosh Computers
40 Xerox WorkCentre/WorkCentre Pro 123/128/133 PostScript® User Guide
Hardware/Software Requirements
The minimum system requirements for the Macintosh printer driver and the utility are
described below.
Computer System
• Macintosh
• Power Macintosh
Basic Software
• For Adobe PostScript 8.7 - Mac OS 8.5 and 8.5.1
• For Adobe PostScript 8.8 - Mac OS 8.6 through 9.2.2
• For PPD Installer - Mac OS X 10.2
NOTE: When using Mac OS X, launch the Classic environment to run the
applications.
Installing the Adobe PostScript Printer Driver
This section describes how to install the Adobe printer driver and how to set the printer
driver for this machine. There are two steps to install the printer driver. Firstly, use the
installer enclosed on the CD-ROM to install the printer to the Macintosh. Then,
configure the printer driver according to the printer used.
Installation Procedure (Mac OS 9.x or earlier)
This section describes the procedures for installing the Adobe PostScript printer driver.
As an example, here is the procedure to install Adobe PostScript 8.8.
1. Insert the PostScript Driver Library CD-ROM in the CD-ROM drive.
The WorkCentre-PS icon appears on the desktop.
2. Double-click [WorkCentre-PS].
3. Double-click the [PrinterDriver] folder depending on your printer model, and then
the “Adobe PostScript 880” folder.
4. Double-click [Adobe PostScript Installer 8.8].
5. When the Installer opens, click [Continue].
6. Read through the license agreement carefully and if you have no objections to it,
click [Accept].
Read the Read Me displayed, then click [Continue].
7. Confirm the Install Location and change it if necessary, then click [Install].
Installation begins.