Xerox WorkCentre M123-M128-4323 - Manual (Page 24)

3 Operation with Windows NT 4.0
24 Xerox WorkCentre/WorkCentre Pro 123/128/133 PostScript® User Guide
Substitute Tray - Specifies what action to take when the paper for the print size is not
loaded in the machine.
Use Printer Settings - Use the printer settings. The settings can be confirmed on
the control panel.
Display Message - Display paper supply messages on the control panel. Printing
is impossible until paper is supplied.
Use Nearest Size (Adjust to Fit) - Selects the nearest paper size and automatically
adjusts the image size as necessary.
Use Nearest Size (No Zoom) - Selects the nearest paper size and prints the same
size as the image.
Use Larger Size (Adjust to Fit) - Selects paper larger than the original and
automatically adjusts the image size as necessary.
Use Larger Size (No Zoom) - Selects paper larger than the original and prints the
same size as the image.
Feed from Bypass Tray - Feed from bypass tray.
Print Mixed Size Originals - Controls the orientation of the second-side image when
printing double-sided.
Output Settings Tab Settings
This section describes the settings in the Output Settings tab.
NOTE: You can restore defaults by clicking [Restore Defaults].