Xerox WorkCentre 7328-7335-7345-7346 con built-in controller-15108 - Manual (Page 9)

Scan to Mailbox Setup (Optional)
Copyright © 200 8 , Xerox Corporation. All rights reserved.
9
7. Scroll through the list to locate an unassigned Mailbox number .
8. Select an unassigned Mailbox number from the displayed list.
9. Touch the Create/Delete button.
10. When the Mailbox Settings screen displays, five setting selections will be displayed on
numbered horizontal lines. To assign a name to the Mailbox, press the Mailbox Name
selection line.
11. Press the Change Settings button.
12. Use the touch screen keyboard to enter in a name for your Mailbox .
13. When finished entering in a name, press the Save button. (To exit the screen, without
saving changes, press the Cancel button.)
14. On the Mailbox settings screen, press any other selection lines of interest and use the
Change Settings button to access and make setting changes. Then touch Save .
15. To exit the Mailbox settings screen, press the Close button.
16. To exit the screen that lists all assigned and unassigned Mailboxes, touch Close .