Procedure for scan to email setup – Xerox WorkCentre 7328-7335-7345-7346 con built-in controller-15108 User Manual
Page 3
Scan to E-mail
Copyright © 200
8
, Xerox Corporation. All rights reserved.
3
Procedure for Scan to Email Setup
1.
Press
Log In/Out
, then type the Login ID
11111
and press
Enter
.
2.
Press
Machine Status
, then touch the
Tools
tab.
3.
Select
System Settings
, then touch
Connectivity and Network Setup
.
4.
Select
Port Settings
.
This manual is related to the following products:
- WorkCentre 7328-7335-7345-7346 con built-in controller-15747 WorkCentre 7328-7335-7345-7346 con built-in controller-15386 WorkCentre 7328-7335-7345-7346 avec built-in controller-12204 WorkCentre 7328-7335-7345-7346 avec built-in controller-11893 WorkCentre 7328-7335-7345-7346 avec built-in controller-12607 WorkCentre 7328-7335-7345-7346 mit built-in controller-10128 WorkCentre 7328-7335-7345-7346 mit built-in controller-9739 WorkCentre 7328-7335-7345-7346 mit built-in controller-9440 WorkCentre 7328-7335-7345-7346 con built-in controller-18236 WorkCentre 7328-7335-7345-7346 con built-in controller-17536 WorkCentre 7328-7335-7345-7346 con built-in controller-17842