Procedure for setup of scan to ftp/smb – Xerox WorkCentre 7328-7335-7345-7346 con built-in controller-15108 User Manual
Page 25
Scan to FTP/SMB (Optional)
Copyright © 200
8
, Xerox Corporation. All rights reserved.
25
Procedure for Setup of Scan to FTP/SMB
To use Scan to PC (FTP/SMB) you need to enable the applicable Ports (SMB or FTP client)
on the Device, and make sure that an IP address has been set on the machine.
Note
The configuration can also be performed using CentreWare Internet Services. For
information on how to use CentreWare Internet Services, refer to the Internet
Services section of this guide.
1.
Display the
System Administrator Menu
screen.
a.
Press the
Log In/Out
button.
b.
Enter the
Login ID
(11111) with the numeric keypad or the keyboard displayed
on screen, then touch
Enter
.
c.
Press the
Machine Status
button on the Control Panel.
d.
Touch the
Tools
tab.
- WorkCentre 7328-7335-7345-7346 con built-in controller-15747 WorkCentre 7328-7335-7345-7346 con built-in controller-15386 WorkCentre 7328-7335-7345-7346 avec built-in controller-12204 WorkCentre 7328-7335-7345-7346 avec built-in controller-11893 WorkCentre 7328-7335-7345-7346 avec built-in controller-12607 WorkCentre 7328-7335-7345-7346 mit built-in controller-10128 WorkCentre 7328-7335-7345-7346 mit built-in controller-9739 WorkCentre 7328-7335-7345-7346 mit built-in controller-9440 WorkCentre 7328-7335-7345-7346 con built-in controller-18236 WorkCentre 7328-7335-7345-7346 con built-in controller-17536 WorkCentre 7328-7335-7345-7346 con built-in controller-17842