Xerox WorkCentre 7328-7335-7345-7346 con built-in controller-15108 User Manual
Page 27
Scan to FTP/SMB (Optional)
Copyright © 200
8
, Xerox Corporation. All rights reserved.
27
3.
When using the
FTP
protocol, enable the
FTP
client port.
a.
Select
System Settings
.
b.
Touch
Connectivity and Network Setup
.
c.
Select
Port Settings
.
d.
From the
Tools
tab screen, select
Network Settings
, then
Port Settings
.
e.
From the
Port Settings
screen, select
FTP Client
and then select
Change
Settings
.
f.
Select
Port Status
and then select
Change Settings
.
g.
Select
Enabled
then select
Save
.
h.
Select
Close
repeatedly until the
Tools
tab screen is displayed.
This manual is related to the following products:
- WorkCentre 7328-7335-7345-7346 con built-in controller-15747 WorkCentre 7328-7335-7345-7346 con built-in controller-15386 WorkCentre 7328-7335-7345-7346 avec built-in controller-12204 WorkCentre 7328-7335-7345-7346 avec built-in controller-11893 WorkCentre 7328-7335-7345-7346 avec built-in controller-12607 WorkCentre 7328-7335-7345-7346 mit built-in controller-10128 WorkCentre 7328-7335-7345-7346 mit built-in controller-9739 WorkCentre 7328-7335-7345-7346 mit built-in controller-9440 WorkCentre 7328-7335-7345-7346 con built-in controller-18236 WorkCentre 7328-7335-7345-7346 con built-in controller-17536 WorkCentre 7328-7335-7345-7346 con built-in controller-17842