Xerox WorkCentre 7328-7335-7345-7346 con built-in controller-15108 - Manual (Page 7)

Scan to Mailbox Setup (Optional)
Copyright © 200 8 , Xerox Corporation. All rights reserved.
7
Scan to Mailbox Setup (Optional)
This feature allows documents to be stored in a mailbox for future processing. Scan to
Mailbox can be setup at the machine control panel or at a network computer through the
CentreWare Internet Services webpage. Instructions for each method are shown.
See also:
System Administrator Guide : Contains detail concerning Network Scanning setup.
Interactive User Guide : Contains information on using mailboxes.
Prerequisites for Scan to Mailbox Setup
Confirm that:
1. An existing operational network utilizing TCP/IP is available.
Procedure for Scan to Mailbox Setup through the Control Panel
1. Press Log In/Out .
2. On the keypad enter 11111 or the current User ID. Touch Enter when finished.
3. Press the Machine Status button on the Control Panel.
4. Press the Tools tab.