Xerox WorkCentre 7328-7335-7345-7346 con built-in controller-15108 - Manual (Page 15)

Scan to Mailbox Setup (Optional)
Copyright © 200 8 , Xerox Corporation. All rights reserved.
15
Procedure for Scanning to Mailbox
1. From the device's main screen, press the Scan to Mailbox button.
2. When the Scan to Mailbox screen displays, a list of Mailboxes will be shown. Use the
supplied arrow to scroll through the icons to locate your Mailbox.
3. Select your Mailbox by touching its selection line on the touch screen.
4. If the Passcode screen displays, enter your passcode (series of numbers) using the
Control Panel's numeric keypad.
5. Press the Enter button on the touch screen.