Xerox DocuColor 240-250 con built-in Fiery controller-16150 - Manual (Page 7)

Page 7
Creating an SMB port in Windows 2000/XP
To create an SMB port in Windows 2000/XP, you must first establish a connection to the
Fiery by its IP address. Choose Start and select Run. At the prompt, enter “\\” followed by the
Fiery IP address, and then click OK. After you make the connection, follow the instructions
to create an SMB port on Windows 2000/XP.
Banner Page on NetWare networks
We recommend that you disable the NetWare banner page. Instead, configure the Fiery in
Setup to use the Cover Page with each job.
User name on Cover Page from Netware
The Cover Page displays the complete NetWare context for the user name.
Printer driver Configuring the Windows printer drivers
To use the printer driver on Windows 2000/XP/Server 2003, you must first configure the
options on the Advanced tab of the printer driver after installation is complete.
T O CONFIGURE THE OPTIONS ON THE A DVANCED TAB
1 Windows 2000: Click Start, choose Settings, and then choose Printers.
Windows XP: Click Start and choose Printer and Faxes.
Windows Server 2003: Click Start, choose Control Panel, and then choose Printers and Faxes.
2 Click the Fiery icon and choose Properties from the File menu.
3 Click the Advanced tab.
4 Select the following options:
• Spool print documents
• Start printing immediately
• Print spooled documents first
5 Clear the following option:
• Enable advanced printing features.
6 Click Apply to save your changes.
7 Click OK.
Job Monitor
Job Monitor is automatically installed when you install a Windows printer driver.