Xerox DocuColor 240-250 con built-in Fiery controller-16150 - Manual (Page 4)

Page 4
Accessing WebSetup
If you are unable to access WebSetup by entering the DNS name of the Fiery in Internet
Explorer, perform the following steps:
1 Start WebSetup by entering the IP address of the Fiery in Internet Explorer.
The Accessing WebSetup window appears, displaying instructions for configuring
Internet Explorer.
2 Follow the on-screen instructions.
If the Java Custom Settings button is not visible, scroll to the Microsoft VM area of the
Custom Level dialog box and select Custom, under Java Permissions.
3 Repeat the instructions, but select the Local Intranet zone, instead of Internet. Configure
the Local Intranet options using the same settings that were used for the Internet zone.
FTP Proxy Setup
To use the FTP Proxy service, you must first enable FTP Services.
Printing from Tray 5 (Bypass Tray) by default
To set a default for jobs to use the Bypass Tray, specify the tray at print time in the printer
driver. There is no Setup option by which the administrator can set a default.
WINS Address
The WINS Address does not appear in WebSetup in DHCP mode when you configure
Network Setup. Print a Configuration page to see the WINS address.
WebSetup on Mac OS X
To use WebTools on Mac OS X, set the display resolution to 1280 x 1040 or higher.
Otherwise, some options in WebSetup may be hidden.
Job Log Setup
You must enable both Auto Print Job Log After 55 Jobs and Auto Clear Job Log After
55 Jobs for them to function properly. Disabling either one of them results in both
features not functioning.
Error History Report
The Error History Report shows the error “027-741 Job Template Server Connect Fail” each
time the Fiery is rebooted. This message is triggered as part of the normal start-up sequence
and does not indicate an error condition.