Xerox DocuColor 240-250 con built-in Fiery controller-16150 - Manual (Page 30)

Page 30
Downloading PDF files with mixed page sizes or orientations
When you download PDF files that contain more than one page size or orientation, the file
may not print correctly. To print the file, open it in Adobe Acrobat and print using the printer
driver.
Downloading EPS files
You must select Show EPS Files to download EPS files.
Downloading 16-bit TIFF Files
Downloader is unable to download 16-bit TIFF files to the Fiery.
File types
When you browse files from WebDownloader, WebDownloader does not determine the
default file type or the file type listed in the File dialog box. The default file type is predefined
by your Internet browser. If you send HTML files to the printer, the data is printed as ASCII
text (the default extension for ASCII text is “.txt”).
When you download PDF files from a Windows computer, the file name and user name are
displayed as “Unknown.”
ColorWise Pro Tools Color defaults
To set defaults for color printing options, use Color Setup in ColorWise Pro Tools.
The exception is Color Mode, which cannot be set in Color Setup, nor in Setup from
Command WorkStation or WebSetup. However, you can set the color mode for a job at
print time when you print from the printer driver.
PANTONE spot color tints
If the rendering of some PANTONE spot color tints does not match the expected spot color,
install the 1-LQ6D7 patch. You can obtain this patch using Software Updates in WebTools.
ColorCal
Make sure that the Original Orientation option on the copier is set to Head to Top and
that the ColorCal patch pages are positioned Head to Top on the copier platen.
When you print measurement pages for ColorCal, an instruction page also prints. To ensure
good results after calibration, follow these instructions.
N OTE : There is currently no way to print only the measurement pages without the instruction
page.