Konica Minolta FK-502 - Manual (Page 84)

Transmission 3
bizhub 750/600 3-25
Tr
an
sm
iss
ion
Chapter 3
– In case of the dial (pulse) line, you can switch it to the push-button
tone using the asterisk
key.
– Pause
Press [Pause] to insert a space in a dialed number. Pressing [Pause]
once creates an interval of one second between numbers. Multiple
spaces can also be entered. A “P” is displayed on the screen.
– When the PBX connection is [ON] and a call is made from the
internal line to the outside line, press [Pause] after the outside line
number such as “0” so that dialing is made more surely. “P” is
displayed on the screen.
– -
This is entered as a separation symbol when dialing. It has no effect
on dialing. A “-” is displayed on the screen.
– Abbr. Dial
Enter the Abbreviated dialing number (up to 2,000 from 0001 to
2000) through the keypad and specify the destination registered in
the Address Book.
On the screen, A abbr. number: Destination name is displayed as
seen in the example “A0001: FAX1”.
– Scan to E-Mail
An E-Mail attached with an image is sent.
– When the destination is an E-Mail address, the Subject of the E-
Mail, the Text, the File Name of image, and the From of the sender
can be set manually. For details, see "Setting Transmission
Conditions" on page 3-10.
– No sending or reception of a fax in color is available. If you want to
send an image in color, use the Scan function. For more information
of the Scan function, see “User's Guide (Network Scanner
Operations).”
– Recently Dialed #
A fax transmission is made to the destination to which transmission
was made previously.
– For details of Recently Dial #, see "Recently Dialed" on page 3-28
– Save in User Box
An image is saved in the internal hard disk.
3
Press [Start].
Transmission begins.