Konica Minolta FK-502 - Manual (Page 279)

11 Utility Mode
11-10 bizhub 750/600
Utility Mode
Ch
ap
te
r 11
11.2.11Administrator Setting >> Fax Setting >> PBX CN Set
Sets the connection method of the PBX line. (page 11-57)
TSI User Box
Setting This is a function to allocate received
originals according to the TSI infor-
mation of faxes received.
Or set up the action when receiving
unregistered TSI information.
This is not displayed if the optional
hard disk is not installed. ON / OFF
*
Automatically Print
*
/Memo-
ry RX User Box
Receive & Print (ON / OFF
*
)
Item Description Available value
PBX CN Mode
Set Select ON when your FK-502 is connected
to PBX line.
When PBX connection mode is set at ON,
this parameter determines the outside line
access code. The external line access code
is the prefix attached to the telephone
number when dialing to an external line.
This prefix will be dialed when external line
option is selected with abbreviated dial
number or Program. ON / OFF
*
When set to ON, the
number is of the outside
line.
Item Description Available value