Konica Minolta FK-502 - Manual (Page 141)

7 Transmission Applications
7-4 bizhub 750/600
Tr
ansmission
Ap
plicat
ion
s
Chapter 7
7.2 Application Functions Overview
The following function is displayed in the Scan Setting screen or the Comm.
Setting screen.
[Cancel]
Returns to the former screen.
[OK]
This is pressed when returning to the fax
screen.
[OFF]
Release the setting that has been set and
return to the preceding screen.
[Reset]
Turn off all the functions provided on the
screen.
Scan Setting screen
Application screen
Comm. Setting screen
Special Origi-
nal: Mixed Origi-
nal You can send document pages of mixed sizes in a single se-
quence of operations. (page 7-6)
Z-Folded
Original You can send Z folded original because the ADF can determine
the document size properly. Some facsimiles cannot detect the
document size if it has been folded. (page 7-9)
Long Original You can send originals longer than 432 mm. (page 7-12)
Bind Position: Function to specify the stapling position of the original when
reading a double side original in the ADF and correct vertically
the rear face of the original. (page 7-15)
Frame Erase: When transmitting pages in a book, this function allows you to
erase dark bands that would otherwise be reproduced in the
marginal areas of the transmitted pages. (page 7-18)
Background Adjustment: Function to send a message after adjusting the density in the
background color of the original. (page 7-21)
TX Stamp (Only when the
stamp unit is installed.) When transmitting a fax via the copier's ADF, a stamp can be
affixed to the pages of the document that have already been
scanned, allowing you to confirm that these pages have been
scanned. (page 7-24)
Scan Size: This function allows you to designate the size of the document
to be transmitted. It is convenient when you intend to transmit
part of a page or pages. (page 7-27)