Tx/rx setting – Konica Minolta FK-502 User Manual
Page 303
11
Utility Mode
11-34
bizhub 750/600
Utility Mode
Ch
ap
te
r 11
*4
:
When [Min. Reduction for RX Print] is set to [x1.0], [Print Paper
Selection] and [Tray Selection for RX Print] are set to [Auto]. [Print
Separate Fax Pages] is turned to [OFF].
TX/RX Setting
1
Open the Administrator Setting screen (See "Entering Administrator
Setting" on page 11-3).
2
Press [Fax Setting].
–
Some items may not be displayed depending on the optional
settings.
–
In the Utility Mode, it is also possible to enter a number displayed
in the key through the keypad for selection. In the case of [Fax
Setting], enter 8 through the numeric keypad.
3
Press [TX/RX Setting].
This manual is related to the following products: