Konica Minolta FK-502 - Manual (Page 278)

Utility Mode 11
bizhub 750/600 11-9
Utility Mode
Ch
ap
te
r 11
11.2.10Administrator Setting >> Fax Setting >> Function Setting
Turns ON/OFF transmission/reception functions. (page 11-36)
Item Description Available value
Fu
nct
ion ON/OFF Se
ttin
g
F-Code
TX For details, see "Turning ON/OFF
transmission/reception functions" (p.
11-36). ON
*
/ OFF
Relay RX Broadcast the document received
from the originating station as an in-
termediate relay station to the termi-
nating station. To use the Relay RX
function, the Relay User Box should
be registered. ON * / OFF
Relay
Print Print the document received from the
originating station. ON / OFF
*
Destina-
tion
Check
Display
Function Set whether or not to display the list
of destinations specified at the time
of facsimile transmission. ON / OFF
*
Memory RX The memory reception is the function
used to receive documents and store
in memory so that you can print them
out later as necessary. ON / OFF
*
Closed Net-
work RX The closed area reception is the
function used to receive the incom-
ing data only when the sender's
password is valid. ON / OFF
*
Set a password in 4 digits.
Forward TX
Setting The Fax transfer is the function used
to transfer the received data to a cer-
tain station determined in advance. OFF
*
/ Forward & Print /
Forward & Print (If TX Fails)
Forward Dest.
Incomplete TX
Hold Documents which could not be
transmitted by the auto redial func-
tion because of a communication er-
ror or busy remote station is saved
temporarily in the Fax Retransmit
User Box. ON / OFF
*
When the Incomplete TX
Hold is set to ON, specify
the Incomplete TX Hold
Time.
PC-Fax RX Set-
ting The PC-Fax RX Setting feature offers
a procedure for saving files contain-
ing received faxes in Boxes on the
hard disk.
By setting to ON the PC-Fax RX Set-
ting function, you can set up whether
or not to print the data received and
set up the Communication Pass-
word.
This is not displayed if the optional
hard disk is not installed. OFF
*
/ ON
Memory RX User Box /
Specified User Box
Save & Print (ON / OFF
*
)
Communication Password
(ON / OFF
*
)