Konica Minolta FK-502 - Manual (Page 210)

Polling 9
bizhub 750/600 9-9
Polling
Chapter 9
8
Set other functions if necessary.
– See "Setting Transmission Conditions" on page 3-10 for
information about setting functions in the FAX screen. See
"Application Functions Overview" on page 7-4 for information
about setting functions in the FAX Application screen.
9
Set the original document.
– See "Placing Originals on the Platen Glass" on page 3-6 for
information about setting the document.
10
Press [Start].
– If you want to stop the FK-502 from reading the document after
pressing [Start], press [Stop] and then press [Yes] on the
Confirmation screen.
The FK-502 reads the document and places it in the Bulletin board.
9.3.2 Receive by Polling a Document Written to the Bulletin
Board of a Destination (FAX)
Receive by Polling a Document Written to the Bulletin Board of a
Destination (FAX)
You can receive by polling the document placed in a bulletin board of a
destination. Perform the following procedure for this purpose.
1
Press [Fax] on the control panel to view the FAX screen, if it is not
already displayed.
2
Press [Comm. Setting].
3
Press [Polling RX].