Konica Minolta FK-502 - Manual (Page 236)

Registering/Settings 10
bizhub 750/600 10-23
Re
gist
erin
g/
Set
ti
ngs
Chapter 10
– In the Utility Mode, it is also possible to enter a number displayed
in the key through the keypad for selection. In the case of
[Program], enter the "3" on the keypad.
3
Select the Program you want to register and then press [Edit].
– Display of [Scan Setting] and [Comm. Setting]
– Setting Value: ON
OFF Not registered
– Display: * - (Space)
– If you press or in the left-hand side of [Page List], you can
change the page to display. 15 every destination per page of
destination are displayed.
– If you press [Page List], you can specify the display of a Program
list per page.
– If you press [Change Page Name] in the Page List screen, you can
change the page name it is displayed.
– If you press or in the right hand side of list, the next Pro-
gram in the page can be displayed.
– In the case of the destination for scanner, it is displayed as "It is a
destination for scanner."
4
Press [Name], enter the name of Program.
– For the operation of the entering character, see page 14-3.
– The name can be up to 24 characters.
5
Press [Destination].