Konica Minolta FK-502 - Manual (Page 266)

Registering/Settings 10
bizhub 750/600 10-53
Re
gist
erin
g/
Set
ti
ngs
Chapter 10
10.8 Setting the Relay User Box
With this machine, the Relay RX function using the F code can be used.
To use this machine as an intermediate relay station, the [Relay RX] should
be set to ON in the Function ON/OFF Setting in the Utility Mode and then the
Relay User Box should be registered. Up to 5 Relay User Boxes can be
registerd.
!
Detail
Notify the originating station side transmitting the document of this
setting.
To use the [Relay RX], the terminating station should be registered as
Group in advance.
Refer to p. 11-36 for the setting of the Relay RX.
Refer to p. 7-41 for the operation to specify a relay at the time of
transmission (operation of the originating station).
Refer to p. 10-16 for the registration of Group.
Relay User Box can be also registered using the PageScope Web
Connection. Refer to the "PageScope Web Connection" on page 13-2 for
the method to use the PageScope Web Connection.
Registering the Relay User Box
1
Press the [Utility/Counter] key.
2
Press [One-Touch Registration].