Konica Minolta Bizhub 215 - Manual (Page 97)

bizhub 215 6-10
6.3 Tray Settings 6
5
Use +, to select [METRIC] or [INCH], then press OK.
This returns to the Tray Settings screen.
6.3.3 Configuring paper settings for Tray1
1
Select [PAPER SOURCE SETUP].
% For details on selecting [PAPER SOURCE SETUP], refer to page 6-9.
2
Use +, to select [TRAY1], then press OK.
% To set the paper type, go to Step 5.
3
Use +, to select [PAPER SIZE], then press OK.
4
Use +, to select the paper size, then press OK.
% For [MEMORY1] or [MEMORY2], you can select the paper size registered in [CUSTOM SIZE MEM-
ORY]. For details on registering the custom size, refer to page 6-12.
% If you have selected [SIZE INPUT], use the Keypad to enter the lengths of X and Y on the next
screen, then press OK.
This returns to the Tray Settings screen.
% To continuously set the paper type, go to Step 5.
5
Use +, to select [PAPER TYPE], then press OK.