Konica Minolta Bizhub 215 - Manual (Page 45)

bizhub 215 4-2
4.1 Copy 4
4 Making Copies
4.1 Copy
This section describes basic procedures for loading and copying an original.
4.1.1 Basic copying method
1
Load the original.
% For details on how to load the original, refer to page 3-11.
2
Configure required settings on the Control Panel.
% For details on the basic functions, refer to page 4-2.
% For details on the Application, refer to page 5-2.
3
Set the number of copies on the Keypad,
% Set the number of copies in the range from 1 to 999.
% Press Clear/Stop to clear the number of copies you have set.
4
Press the Start key.
Copying begins.
% To stop the copy operation being performed, press Clear/Stop.
% For details on stopping copying, refer to page 4-6.