4 loading ohp transparencies into bypass tray, Loading ohp transparencies into bypass tray -11 – Konica Minolta Bizhub 215 User Manual
Page 54

bizhub 215
4-11
4.4
Manually making copies
4
4.4.4
Loading OHP transparencies into Bypass Tray
Up to 10 OHP transparencies can be loaded into the Bypass Tray.
NOTICE
If you load OHP transparencies, set the size and type of paper on the Control Panel.
1
Load OHP transparencies in the w or v direction to fit the original.
% Do not load the OHP transparencies up to the point where the top of the stack is higher than the +
mark.
d
Reference
For details on how to set the size and type of paper, refer to Steps 4 to 7 in page 4-14.
% The relation between the orientation of the original image and that of the copy image to be printed
on OHP transparencies is as shown below.