2 machine setting, Machine setting -3 – Konica Minolta Bizhub 215 User Manual
Page 90

bizhub 215
6-3
6.2
Machine Setting
6
6.2
Machine Setting
In the Machine Setting screen, change the settings for the following items.
No.
Settings
Description
1
[AUTO PANEL RESET]
After completing copy operations or the last key operation, set the
time period until the auto panel reset function starts from [OFF],
[30 sec], [1 min], [2 min], [3 min], [4 min], or [5 min]. The auto panel
reset function automatically returns the screen to the initial mode,
and the basic screen appears.
•
The factory default is [1 min].
2
[SLEEP MODE]
Set the time period until this machine enters sleep mode after the
user paused operations within the range from [1 min] to [240 min].
•
The factory default is [15 min].
3
[DENSITY(ADF)]
Set the image quality level when using the optional ADF.
[MODE1]: Select this to make copies with the density same as that of
the original.
[MODE2]: Select this to set the lighter copy density and prevent con-
tamination due to copying.
•
The factory default is [MODE1].
4
[DENSITY(BOOK)]
Set the image quality level when you copy the original by setting it on
the Original Glass.
[MODE1]: Select this to make copies with the density same as that of
the original.
[MODE2]: Select this to set the lighter copy density and prevent con-
tamination due to copying.
•
The factory default is [MODE1].
5
[PRINT DENSITY]
Adjust copy density.
•
The factory default is (
).
6
[LCD CONTRAST]
Use this dial to adjust the brightness of the LCD Display.
•
The factory default is (
).
7
[KEY SPEED SETTING]
Set the time period until repeating input starts by holding down the
key and the interval for repetition to [0.1 sec], [0.3 sec], [0.5sec], [1.0
sec], [1.5 sec], [2.0 sec], [2.5 sec], or [3.0sec].
•
The factory default is Start Time: [1.0 sec] and Interval: [0.1sec].
8
[LANGUAGE]
Set a display screen language.
•
The factory default is [ENGLISH].
9
[BUZZOR VOLUME]
This item is available if the optional FAX Kit FK-510 is installed. You
can adjust buzzer volume.
•
The factory default is [LOW].
For details, refer to [User's Guide Fax Operations].
10
[INITIAL MODE]
This item is available if the optional FAX Kit FK-510 is installed. You
can specify the initial mode.
•
The factory default is [COPY].
For details, refer to [User's Guide Fax Operations].
11
[SCAN THRESHOLD]
This item is available if the optional FAX Kit FK-510, Image Control-
ler IC-209, or Network Card NC-504 is installed. You can set re-
maining amount of memory when you interrupt to scan the original
because the memory becomes full.
•
The factory default is [512Kbyte].
For details, refer to [User's Guide Fax Operations].