Konica Minolta Bizhub 215 - Manual (Page 112)

bizhub 215 6-25
6.7 COPY SETTING 1 6
6.7.11 Adjusting the page margin width
1
Select [COPY SETTING 1].
% For details on selecting [COPY SETTING 1], refer to page 6-21.
2
Use +, to select [MARGIN SETTING], then press OK.
3
Enter the page margin width using the Keypad, then press OK.
% You can set the binding margin width within the range from 0 mm to 20 mm.
% To correct the value, press Clear/Stop, and enter a new value using the Keypad.
This returns to the COPY SETTING 1 screen.
6.7.12 Setting the erase width
1
Select [COPY SETTING 1].
% For details on selecting [COPY SETTING 1], refer to page 6-21.
2
Use +, to select [ERASE SETTING], then press OK.
3
Use +, to select [LEFT], [UPPER], or [FRAME], then press OK.
4
Enter the erase width using the Keypad, then press OK.
% You can set the erase width within the range from 4 mm to 20 mm.
% To correct the value, press Clear/Stop, and enter a new value using the Keypad.
This returns to the COPY SETTING 1 screen.