Konica Minolta Bizhub 215 - Manual (Page 53)

bizhub 215 4-10
4.4 Manually making copies 4
4.4.3 Loading plain paper into the Bypass Tray
Up to 100 sheets of plain paper can be loaded into the Bypass Tray.
Tips
- If you load paper other than plain paper, you need to specify the paper type on the Control Panel.
NOTICE
Load the paper so that the side to be copied is facing down.
Be sure to uncurl the paper before loading it.
1
Load paper into the Bypass Tray.
% Do not load the sheets up to the point where the top of
the stack is higher than the+ mark.
2
Adjust the guide and the Bypass Tray Extension to fit the
paper size.
d
Reference
For details on how to set the size and type of paper, refer to Steps 4 to 7 in page 4-14.
% The relation between the orientation of the original image and that of the copy image to be printed
on paper is as shown below.