1 selecting copy setting 1, 2 setting the tray priority, 3 specifying the quality priority – Konica Minolta Bizhub 215 User Manual
Page 108: Selecting copy setting 1 -21, Setting the tray priority -21, Specifying the quality priority -21, P. 6-21
bizhub 215
6-21
6.7
COPY SETTING 1
6
6.7.1
Selecting COPY SETTING 1
1
Press the Utility key.
The Utility screen appears.
2
Use +, to select [COPY SETTING 1], then press OK.
The COPY SETTING 1 screen appears.
6.7.2
Setting the tray priority
1
Select [COPY SETTING 1].
% For details on selecting [COPY SETTING 1], refer to page 6-21.
2
Use +, to select [PAPER PRIORITY], then press OK.
3
Use +, to select a target tray, then press OK.
% If Bypass Tray is installed, the following screen appears.
This returns to the COPY SETTING 1 screen.
Tips
-
If the same size and type of paper as that in the priority tray is loaded into multiple trays and they have
run out of paper, a message may appear to notify you to replenish the trays other than the priority tray
with paper. If the message appears, replenish paper according to the on-screen instructions.
6.7.3
Specifying the quality priority
1
Select [COPY SETTING 1].
% For details on selecting [COPY SETTING 1], refer to page 6-21.
2
Use +, to select [QUALITY PRIORITY], then press OK.