Konica Minolta bizhub C550 - Manual (Page 89)

To send a fax 2
C550 2-33
2.6 Sending a fax using a program destination
When a program address has been registered, a fax can be sent by specify-
ing the registered program button.
If transmission settings (Original type and original specification etc.) are reg-
istered by a program key, a fax can be sent by simply touching that button
without the need for specifying function settings each time.
It is also possible to register a group button in 1 program button to send a
fax once or register a time and send faxes at the same time each day.
To send a fax after specifying a program destination
1
Press [Fax/Scan] key, and the Fax/Scan screen is displayed.
2
Load the original to be faxed.
– Refer to “Loading the original” on page 2-7 for details on loading
the original.
3
Press [Mode Memory]
key.
4
Touch [Page List].