Konica Minolta bizhub C550 - Manual (Page 485)

Appendix 12
C550 12-9
Temporary For-
ward transmis-
sion This is a function to manually forward the received original on hold, by using
the setting confirmation button of the control panel. The transmission is used
when the Fax/Scan screen is been displayed, or the operation is being
stopped due to paper misfeed or running out of paper.
Timer TX A function for sending a fax at a specified time. Sending faxes at discounted
calling times, such as late at night or early in the morning can help to reduce
the transmission costs.
Address Book This is a function to register the frequently used fax number of the recipient.
When destination is to be registered, you can register the address name and
the searched character. It makes possible to specify the address using the
searched character of the abbreviated selection.
Receiving This is the condition where the fax machine answers the call.
Relay distribu-
tion station A feature to broadcast the fax to the relay distribution destination by receiv-
ing the relay request from the relay instruction station.
Relay instruction
station The fax machine that sends the relay broadcast request.
Relay broadcast This is a function to send the broadcast the fax via other fax (called as a relay
distribution station). When there are multiple broadcast destinations at dis-
tant places, one of the broadcast destination is specified to the relay station
and the entire amount of the communication charges can be reduced by do-
ing the relay transmission from the relaying station.
Long original A setting for sending original pages longer than A3 size (420mm/16-1/2 inch).
Long originals can be transmitted by specifying the setting for long originals.
Transmission
time The time needed to send a fax. The higher the resolution or larger the paper,
the longer the transmission takes.
Transmission
speed Specifies the transmission speed of modem for fax.
In this function, the fax can be communicated at a high transmission speed
of 33,600bps. When overseas communication mode is set, it communicates
at a high transmission speed a with a noise of 7200bps or 4800bps.
Broadcast A transmission of a single original to many recipients in one operation.
Password trans-
mission A function for sending a fax with a password. If the recipient’s fax machine
is set for closed network receptions, the sender’s fax machine should trans-
mit a fax with the password same as the closed network reception password.
Sending Making a call. It is to send an original or to dial for pollings in case of fax.
Sender name The name of this machine indicated in alphanumeric characters. This name
is printed as a part of the transmission source at the edge of the transmitted
original from the recipient’s machine.
Transmission
source record When a fax has been sent, the transmission time, name, telephone number,
page number that is to be printed at the edge of the original saved on the re-
cipient’s machine.
Sender Fax No. The identifying code for the mutual recognition when transmitting faxes. Nor-
mally the fax number is registered as the Sender Fax No.
Sub-scanning
direction The vertical direction for scanning originals.
Program ad-
dress This is a function for registering recipient’s fax numbers where faxes are fre-
quently sent and received and preset transmission operation procedures. By
simply touching the program button, the address is specified and the com-
munication can be automatically performed with the specified functions.
Terms Explanation