Konica Minolta bizhub C550 - Manual (Page 35)

C550 x-34
Descriptions of original documents and paper
The descriptions used in this manual for documents and paper are explained
below.
Whenever document and pa-
per dimensions are mentioned
in this manual, the value
shown as Y in the illustration
refers to the width, and the
value shown as X refers to the
length.
If the length (X) is longer than
the width (Y), the paper orien-
tation is indicated by w.
If the length (X) is shorter than
the width (Y), the paper orien-
tation is indicated by v.