Konica Minolta BIZHUB C652DS - Manual (Page 216)

bizhub C652/C652DS/C552/C552DS/C452 8-8
8.2 User mode settings 8
Relay User Box
You can create up to five Relay User Boxes. The creation and editing setting items are as follows.
Reference
- To change the setting of a created User Box, select the target User Box and press [Edit].
- If [Edit] is selected, you cannot change the User Box number.
- To delete a created User Box, select the target User Box and press [Delete].
d
Reference
For details on how to register the header or footer, refer to the "User's Guide [Network Scan/Fax/Network
Fax Operations]".
Item Description
Auto Document Delete
Time Specify the period from the date/time when a document was saved in or
last retrieved form a User Box to the date/time when it is to be deleted au-
tomatically.
•
In Delete Time, you can specify the time in addition to the number of
days. To specify the time, enter the numeric value on a 1-minute basis
in the range from 5 minutes to 12 hours.
• When not deleting a document, select [Save].
Item Description
User Box No. Automatically displays an unassigned number. To specify a User Box
number, press [User Box No.], and use the keypad to enter the User Box
number between 1 and 999999999.
User Box Name Press [User Box Name], and enter the User Box name in the control panel
(up to 20 characters). Specifying different User Box numbers enables you
to create User Boxes with the same name.
Relay Destination Select a relay destination to send data from the Relay User Box. Pre-reg-
ister the relay destination as a group destination.
•
When registering a group destination as a relay destination, be sure to
set Abbreviation Dial in the group destination in advance.
Relay TX Password Specify a password to limit access to the User Box. Press [Relay TX Pass-
word], and then enter the password (up to 8 characters).