Konica Minolta BIZHUB 223 - Manual (Page 30)

bizhub 423/363/283/223 2-15
2.4 Canceling the Operation Prohibited State 2
2.4 Canceling the Operation Prohibited State
When access to the machine by the Administrator of the machine through the Administrator Settings from
the control panel is authenticated, the machine enables the operation of Release Setting performed for can-
celing the state of Prohibited Functions When Authentication Error (access lock state) as a result of unautho-
rized access.
Release Setting clears the unauthorized access check count for all User Authentication, Account Track,
SNMP authentication, WebDAV authentication, all Secure Print authentication, and all User Box authentica-
tion, resetting it to zero.
Perform the following procedure to cancel the password entry prohibited state.
- Administrator Settings: The operation prohibited state is canceled by the Service Engineer, or after the
lapse of a predetermined period of time after the main power switch is turned off and on.
- User/Account authentication: Release
- Secure Print authentication: Release
- User Box authentication: Release
- SNMP authentication: Release
- WebDAV authentication: Release
Performing Release Setting
0 For the procedure to call the Security Details screen on the display, see steps 1 and 2 of page 2-13.
0 Do not leave the machine with the setting screen of Administrator Settings left shown on the display. If
it is absolutely necessary to leave the machine, be sure first to log off from the Administrator Settings.
0 When the main power switch is turned off, then on again, wait at least 10 seconds to turn it on after
turning it off. if there is no wait period between turning the main power switch off, then on again, the
machine may not function properly.
Here is the sequence, through which the main power switch and sub power switch are turned on and
off:
Turn off the sub power switch
→ Turn off the main power switch → Turn on the main power switch →
Turn on the sub power switch
1
Call the Security Details screen on the display from the control panel.
2
Touch [Prohibited Functions When Authentication Error].
3
Touch [Release].