Konica Minolta BIZHUB 223 - Manual (Page 116)

bizhub 423/363/283/223 3-6
3.1 User Authentication Function 3
12
Enter the 8-digit Account Password from the keyboard or keypad.
% Press the [C] key to clear all characters.
% Touch [Delete] to delete the last character entered.
% Touch [Shift] to show the upper case/symbol screen.
% Touch [Cancel] to go back to the screen shown in step 11.
13
Touch [OK].
14
Press [Access] or touch [Login]. If documents are stored in the ID & Print User Box, the login method
selected in step 7 will appear. Select the login method displayed on the screen.
% If a wrong Account Name is entered, a message that tells that the authentication has failed appears.
Enter the correct Account Name.
% If a wrong Account Password is entered, a message that tells that the authentication has failed ap-
pears. Enter the correct Account Password.
% If the Enhanced Security Mode is set to [ON], the entry of a wrong Account Password is counted as
unauthorized access. If a wrong Account Password for the corresponding Account Name entered
is entered a predetermined number of times (once to three times) or more set by the Administrator
of the machine, a message appears that tells that authentication has not been successful for any
subsequent operation for authentication. The machine is then set into an access lock state, rejecting
any more logon attempts. To cancel the access lock state, the Administrator of the machine must
perform the Release Setting. Contact the Administrator of the machine.
15
Pressing the [Access] key will show the following screen.
To log off, select [Log off].