Konica Minolta bizhub 200 - Manual (Page 62)

Printing documents 3
200/250/350 3-9
P
rint
ing
doc
um
ent
s
Chap
ter
3
9
Select the desired sort, staple and punch settings.
– If staple or punch settings were specified, touch [Position Setting]
to specify the position of the binding margin.
– We recommend that “Auto” be selected for the position.
– The staple settings are available only if the optional finisher is in-
stalled.
– The punch settings are available only if the optional finisher and
punch unit are installed.
– The “Crease” setting is available only if the optional finisher and
saddle stitcher are installed.
10
Check the document information, and then touch [Print].
The document is printed.
11
Touch [OK] when the confirmation message appears.
Enter
2-Hole
Punch
Non-Sort
Change the settings of
the selected document.
Print
Cancel
Group
Sort
2 Staples
Corner
Staple
1 2
3
Print
3-Hole
Punch
Job List
2
1
2 1
Position
Setting
Enter
2-Hole
Punch
Non-Sort
Change the settings of
the selected document.
Print
Cancel
Group
Sort
2 Staples
Corner
Staple
Print
3-Hole
Punch
Job List