Printing the result report, Printing the result report -15, P. 2-15 – Konica Minolta bizhub 200 User Manual
Page 38
Saving documents
2
200/250/350
2-15
Sav
ing d
o
c
u
me
nts
Ch
apte
r 2
–
Touch [Auto Detect] to automatically select the size closest to the
size of the document. However, if the document is smaller than Let-
ter size, Letter size is selected.
2
Note
Touch [Metric] to specify a metric size.
When data is saved, the settings return to their defaults.
Printing the result report
The conditions for printing the result report can be specified.
The conditions for printing the result report are preset with the Report Set-
tings parameters from the Administrator Management 1 screen. Follow the
procedure described below to change these conditions.
The following settings can be specified.
SCANReady
Standard
Chain
100%
Memory
Free
One-Touch Search
Menu
Direct
Input
Quality&
Reduction
Job List
Quality
Density
Original Size Setting
Reduction/
Area
Legal
Auto Detect
Metric
5
1/2
8
1/2
5
1/2
8
1/2
Letter
Letter
Exec.
Exec.
Enter
Setting
Description
Default
Select this setting to apply the displayed print conditions spec-
ified in Administrator mode.
ON
Select this setting to print the report, regardless of the transmis-
sion result.
If TX Fails
Select this setting to print the report if the data could not be
saved.
OFF
Select this setting to not print the report, regardless of the trans-
mission result.