3 scanning and saving the data (scan to hdd), Available functions/parameters, Scanning and saving the data (scan to hdd) -7 – Konica Minolta bizhub 200 User Manual
Page 30: Available functions/parameters -7
Saving documents
2
200/250/350
2-7
Sav
ing d
o
c
u
me
nts
Ch
apte
r 2
2.3
Scanning and saving the data (Scan to HDD)
Scan data can be saved in an HDD box on the machine’s internal hard disk.
The following procedures describe operations that must be performed and
the settings that must be specified when touching a single button to save a
document.
Available functions/parameters
Touch [Quality & Reduction] or [Menu] in the screen that appears after the
[Fax/Scan] key in the control panel is pressed, and then specify settings for
the following functions/parameters when saving the scanned document.
2
Note
The following Quality & Reduction parameters have no effect, even if set-
tings have been specified.
- “Reduction” on the Reduction/Area tab
Quality/Reduction screen
2
Note
The following Menu functions and parameters have no effect, even if set-
tings have been specified.
- “TSI” on the Setting 1 tab
- “Rotation TX” on the Setting 1 tab
- “Subject Selection” on the Network tab
- “Reply Address” on the Network tab
Menu screen
Parameter
Description
Page
Reference
Quality
Select the scanning resolution (amount of details).
Density
Specify the density for scanning.
Reduction/
Area
Original
Size Set.
Select the desired standard size for the area to be
scanned.