Konica Minolta bizhub 282 - Manual (Page 73)

Appendix
A
Additional information 73
Error Handling
The following explains the procedure employed when an
error occurs and Network FAX cannot be started or run.
The following settings apply to both Windows 2000 and
Windows XP.
* Always log on again with administrator privileges
before entering the following settings.
Click [Start], [Programs], [Accessories], and
[Explorer].
In [Explorer], right-click the Network FAX instal-
lation folder (normally C:\Program Files\ComUse\
skw) to display the menu. Click [Properties] on
this menu.
Windows XP Professional
Windows 2000
Click the [Security] tab in the [Properties]
screen.
In the top window of the screen, select the user
name for whom Network FAX is to be started (the
selected user name is highlighted). After select-
ing the user name, place a check in [Allow] beside
[Full Control] in the bottom window of the screen,
and click
OK .
Windows XP Professional
Windows 2000
Setup is now complete.
Log on with the user name selected in 2., and start
and run Network FAX.