Konica Minolta bizhub C650 - Manual (Page 72)

C650 2-47
Saving documents 2
– On the European (metric) model:
5
Touch [OK], and then touch [OK] in the next two screens that appear.
Original Settings
Specify the type of document that is loaded, for example, if it contains mixed page sizes or is folded in a
zigzag.
2
Note
The original settings and direction settings can be used together.
Parameter Description
Mixed Original Select this setting when documents of different sizes are loaded into the ADF (op-
tional). The scan speed is decreased since the size of each page is detected before
it is scanned.
Z-Folded Original Select this setting to detect the size of a zigzag-folded document by the length fed
through the ADF.
Long Original Select this setting for documents that are longer than the standard size.
Original Direction Select the orientation of the document. After the document is scanned, the data is
processed so that it is correctly oriented.
Binding Position Select the binding position, such as when holes are punched in the document or the
document is stapled.
This adjusts the scan of double-sided documents so that the binding position is not
reversed.
Left Select this setting for a document with binding on the left side.
Top Select this setting for a document with binding at the top.
Auto: The binding is on the long side if the page is 297 mm or less, or it is on the short
side if the page is more than 297 mm.
Despeckle Select this setting to reduce the effect that dust on the left partition glass has on im-
ages when the document is loaded into the ADF.