Konica Minolta bizhub C650 - Manual (Page 47)

C650 2-22
Saving documents 2
7
Specify the necessary scan settings and original settings.
– For details on the scan and document settings, refer to "Specifying scan settings" on page 2-29.
8
Load the document into the ADF or place it on the original glass.
9
Touch [Start], or press the [Start] key in the control panel.
2
Note
Only one user box destination can be specified with a single transmission.
Saving on external memory from User Box mode
If the optional local interface kit is installed on this machine, external memory can be connected for saving
scanned documents.
!
Detail
The default setting for saving a document to external memory is "OFF" (cannot be saved). In addition,
the user setting is "OFF" (cannot be saved), even if user authentication settings have been specified.
To save documents to external memory, change the settings in Administrator mode so that documents
can be saved. For details, refer to "External Memory Function Settings" on page 7-24.
1
Press the [User Box] key in the control panel.
The User Box Operations screen appears.
2
Touch [Save Document].
3
Touch [System User Box], and then touch [External Memory].
4
Touch [OK].