3 control panel, Control panel -6 – Konica Minolta bizhub C650 User Manual
Page 21
C650
1-6
Overview of the User Box functions
1
1.3
Control panel
Use the control panel for User Box mode operation. The following keys and switches are provided on the
control panel.
1
2
4
5
3
6
7
8
13
14
12
9
15
16
17
18
11
10
19
20
21
22
No.
Part name
Description
1
Touch panel
Displays various screens and messages. Specify the various
settings by directly touching the panel.
2
Main Power indicator
Lights up in green when the machine is turned on with the main
power switch.
3
Sub power switch
Press to turn on/off machine operations, for example, for cop-
ying, printing or scanning. When turned off, the machine enters
a state where it conserves energy.
4
[Mode Memory] key
Press to register (store) the desired copy/scan settings as a
program or to recall a registered copy/scan program.
5
[Utility/Counter] key
Press to display the Utility screen and the Meter Count screen.
6
[Reset] key
Press to clear all settings (except programmed settings) en-
tered in the control panel and touch panel.
7
[Interrupt] key
Press to enter Interrupt mode. While the machine is in Interrupt
mode, the indicator on the [Interrupt] key lights up in green and
the message "Now in Interrupt mode." appears on the touch
panel. To cancel Interrupt mode, press the [Interrupt] key
again.
8
[Stop] key
Pressing the [Stop] key during scanning temporarily stops the
scan operation.
9
[Proof Copy] key
Press to print a single proof copy to be checked before print-
ing a large number of copies.
Press the [Proof Copy] key before scanning or copying, the re-
sult can be viewed on the touch panel.
!
Detail
This key cannot be used if the [User Box] key was pressed
to save a document. To preview a document being saved
in a user box, press the [Fax/Scan] key. For details on pre-
viewing, refer to the User’s Guide [Network Scanner Oper-
ations].