Konica Minolta bizhub C650 - Manual (Page 45)

C650 2-20
Saving documents 2
7
Type in the document name, and then touch [OK].
8
Touch [OK].
The Direct Input tab appears again. The number of the specified user box appears under "Broadcast
Destinations".
9
Specify the necessary scan settings and original settings.
– For details on the scan and document settings, refer to the User’s Guide [Network Scanner
Operations].
10
Load the document into the ADF or place it on the original glass.
11
If desired, press the [Proof Copy] key to check a preview image.
– For details, refer to "Saving after previewing" on page 2-15.
12
Press the [Start] key in the control panel.
2
Note
Only one user box destination can be specified with a single transmission, but multiple e-mail and fax
destinations can be specified.
Saving in User Box mode
Press the [User Box] key in the control panel, and then directly type in the user box destination. Documents
to be saved can be used in the same way as saved scan data.
1
Press the [User Box] key in the control panel.
The User Box Operations screen appears.
2
Touch [Save Document].