Konica Minolta bizhub C650 - Manual (Page 48)

C650 2-23
Saving documents 2
5
Check the name of the document to be saved. Touch [Document Name].
– The default name appears beside "Document Name". To change the name, touch [Delete] until the
characters are deleted, and then type in the new name.
– To erase all of the text, press the [C] (clear) key.
6
Type in the document name, and then touch [OK].
7
Specify the necessary scan and document settings.
– For details on the scan and document settings, refer to "Specifying scan settings" on page 2-29.
8
Load the document into the ADF or place it on the original glass.
9
Touch [Start], or press the [Start] key in the control panel.