beautypg.com

Specifying single-sided/double-sided printing, Specifying finishing settings, P. 4-7 – Konica Minolta bizhub C650 User Manual

Page 108

background image

C650

4-7

Printing a user box document

4

The number of copies can be set between 1 and 9,999.

To reset the number of copies to "1", press the [C] (clear) key.

Specifying single-sided/double-sided printing

Select whether a single-sided or double-sided copy of the document is to be printed.

%

Touch [1-Sided] or [2-Sided].

Specifying Finishing settings

Specify settings for collating, grouping, stapling, hole punching or folding/binding. Settings can be specified
for the following.

Parameter

Description

Sort

Select this setting to feed out copies of the document by sets.

Group

Select this setting to feed out copies of the document by page.

Offset

Select this setting to separate the sets or pages of the copies.
If a finisher is installed, the printed pages are fed out with each set shifted to separate
it.
If no finisher is installed, the printed pages are fed out sorted in an alternating criss-
cross pattern.

Staple

Select one of these settings to bind copies with a staple in the corner (upper left or
upper right) or with two staples. The stapling position can also be selected.

Punch

Select a setting to punch holes in copies. The position of the punched holes can also
be selected.

Half-Fold (Fold/Bind):

Select this setting to fold copies in half before feeding them out.

Center Staple & Fold
(Fold/Bind):

Select this setting to staple copies at two places along the center, then fold the cop-
ies in half before feeding them out.