Directly specifying an ftp destination, Directly specifying an ftp destination -13 – Konica Minolta bizhub C650 User Manual
Page 169
C650
5-13
Sending a user box document
5
–
To specify an additional address, touch [Next Destination], and then enter the information.
The entered addresses appear under "Broadcast Destinations".
2
Reminder
If more than the following number of computers or workgroups exist on the network (subnet) that this
machine belongs to, browsing over the network may not be performed correctly.
Workgroups: 128
Computers: 128
Directly specifying an FTP destination
Settings can be specified for the following.
Detailed Settings
2
Note
If "Manual Destination Input" (displayed by touching [Security Settings] on the Administrator Settings
screen, then [Security Details]) is set to "Restrict", [Direct Input] does not appear.
1
From the Use Document screen, select the document to be sent, and then touch [Send].
2
Touch [FTP] on the Direct Input tab.
Parameter
Description
Host Name
Specify the host name or IP address for the destination. Type using the keyboard that
appears, and then touch [OK].
File Path
Specify the path to the destination folder. Type using the keyboard that appears, and
then touch [OK].
User Name
Type in the user name used to log on, and then touch [OK].
Password
Specify the password. Type using the keyboard that appears, and then touch [OK].
Parameter
Description
Port Number
Type in the port number.
PASV
Select whether or not the PASV (passive) mode is used. Touch [Yes] or [No].
Proxy
Select whether or not a proxy server is used. Touch [Yes] or [No].