Norgren C/146200 LINTRA PLUS - Manual (Page 30)

M/146000, M/146100, M/146200
3/10 N/us 1.6.009.030 Our policy is one of continued research and development. We therefore reserve the right to amend,
without notice, the specifications given in this document.
C/146000/MC – cylinder with alternative ports (ø 25 ... 63 mm)
Type Ø W
C/146.25/.. 25 1.10
(28)
C/146.32/.. 32 1.36
(34.5)
C/146.40/.. 40 1.71
(43.5)
C/146.50/.. 50 2.09
(53)
C/146.63/.. 63 2.34
(59.5)
1. Pressurrize port to move carriage right to left.
2. Pressurize port to move carriage left to right.
3. Port lower port on right end cap is non-functioning.
W
1 1
2 2
3
3
2
1
2
2
2
2
1
1
1
2
4
4
3
2
1 Cushion screw
Hole without thread
Port without function
Moving direction
2
1
3
Warning
These products are intended for use in industrial compressed air
systems only. Do not use these products where pressures and
temperatures can exceed those listed under ‘Technical Data’.
Before using these products with fluids other than those specified.
for non-industrial applications. life-support systems. or other
applications not within published specifications. consult NORGREN.
Through misuse. age. or malfunction. components used in
fluid power systems can fail in various modes.
The system designer is warned to consider the failure modes of
all component parts used in fluid power systems and to provide
adequate safeguards to prevent personal injury or damage to
equipment in the event of such failure.
System designers must provide a warning to end users in
the system instructional manual if protection against a failure
mode cannot be adequately provided.
System designers and end users are cautioned to review specific
warnings found in instruction sheets packed and shipped with
these products.