10 edid, 11 firmware upgrade, Edid – Kramer Electronics VP-8x8TP User Manual
Page 37: Firmware upgrade

EDID
33
33
• Firmware Version
• MAC Address
To edit the IP-related settings:
1. Edit the required field.
2. Click Submit.
The Network Settings confirmation message appears.
3. Click OK.
A message appears showing that the settings have been successfully changed.
4. If the IP address was changed or you selected DHCP, reload the Web page
using the new name or IP address.
10
EDID
Each input on the VP-8x8TP has a factory default EDID loaded (see
Section 14
).
The EDID for each input can be changed independently by uploading an EDID
binary file to each input via the RS-232 port using Kramer EDID Designer
software
11
Firmware Upgrade
.
For instructions on upgrading the firmware, see the Updating the Firmware Using
the P3K Software document.
The latest version of firmware and installation instructions can be downloaded
from the Kramer Web site at
1 Available for download fro